1 - Dust and dust collected on the glass of the solar heater is necessary for the continuity of access to hot water as the accumulation of dust and dust on the surface of the solar pool reduces the ability of the heater to heat water by up to 40%.
لقراءة المنشور باللغة العربية أضغط هــنا
2 - Do not leave the glass of the solar heater broken "solar collector" as it collects dust and dust inside the pump, which reduces the ability of the heater to heat water.
3 - To get the most out of the sun, insulate the hot water pipes in the solar heater by using the appropriate insulation for appropriate heat and proper way.
4 - Before you buy a solar heater and to ensure the continuity of access to hot water in the form required make sure you choose the size of the appropriate solar heater.
5 - periodic maintenance of the heater of the company was said.
6. Make sure that the heating fumes do not go to the solar water heater next to the chimney, where the fumes act on the speed of the corrosion of the heater and accelerate its rust, reducing its operating age and its efficiency in heating water.
7. The solar heater works to heat the water using solar radiation, so avoid blocking this radiation from the solar heater by covering it with ornamental plants or spreading the washing and building retaining walls near it.
8. Install the solar heater as close as possible to hot water use areas (kitchens and bathrooms) to reduce heat lost by pipes.
9 - Isolation of external pipes with suitable materials, and packaging with a layer of moisture and water to withstand different weather conditions.
10. Install solar heaters away from any barriers that block solar radiation such as walls and climbing trees.
11- Place the thermal tank above the solar collector at a rate of 20-30 cm to ensure the continuity of the movement of natural water.
12 - Install the solar heater at an angle of 45 degrees, to ensure access to hot water during the winter.
